10 sheets of waterslide decal paper.
You have the option to choose between
white for colored or black background,
clear for white or light background,
or mixed 5 white and 5 clear.
FOR INKJET OR LASER PRINTER
Check your printer type to make sure you are ordering the correct paper type!
These decals may be applied to any non-porous surfaces like
glass, ceramic, metal, porcelain, wood furnitures, candles, albums,
book covers, appliances, model railroads, diecast cars, fishing roads etc...
Your imagination is your only limit. The pictures on this listing are a few of the projects
made using waterslide decal paper.
These are just examples and are not included in the listing!!!
You are getting 10 blank sheets of waterslide decal paper whan you purchase this auction!
They are shiped in a flat envelope.
The specification on this paper is: weight 160-170grams/sqm, coating 20-21 microns,
letter size 8.5x11inch.
Instructions for Waterslide decal paper:
1. Apply Krylon acrylic spray over the decal paper printed by any inkjet printer. This process it is not required for the laser printed paper. Do not use solvent based coatings or ink with this paper.
2. After it is dry cut out your image and immerse the decal into water bath and slide off the thin film from the liner in 30 seconds.
3. Remove the water inside the film using soft paper and or rubber squeegee.
4. Dry completely the image film using a hair dryer or oven. When possible heat curing at 300 F for 30 min further enhanced surface hardness.
Due to the sensitivity nature of this product we do not accept returns for the decal paper.
Why buy from us?
Video courtesy to SparklesGiftShop2017